The Diabetes Forum Support Community For Diabetics Online banner
1 - 4 of 4 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter · #1 ·
I just bought a whole system of Minimed guardian real-time glucose testing. The transmitter works very well for tester, but when I connected the sensor with transmitter, there was no signal...No green light on...no sensor icon on...I have tried 4 sensors, neither of them worked...

What's going on???
 

·
Registered
Joined
·
633 Posts
Have you linked the trasmitter to the receiver. You need to do this before anything will work. On the back of the transmitter there is a ceial number to use and it should tell you how to do this. Also make sure it charde up all the way.
 

·
Registered
Joined
·
2 Posts
Discussion Starter · #3 ·
Thanks for your reply...Yes, I did all the things...Actually, it worked very well when I used the first sensor but failed to the other 4...
 

·
Registered
Joined
·
633 Posts
I would seend them back and get replacements then. I have never had a problem getting them to start.
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top